RV Insert Roof Edge Trim Molding

Teardrop Trailer Aluminum Trim Molding Corner molding is used when creating a seal at the edges of the exterior panels to protect against water intrusion. It can be used on roof edges or wall corners yielding a finished, professional look. A good seal is critical for protection against water damage in your RV.

Insert moldings feature a channel that accepts a vinyl insert (sold separately) for covering the screw heads.

This molding is made from aluminum with a mill finish. Aluminum moldings do not rust. These moldings attach with screws, require sealing tape, and optional caulking. (screws, sealing tape, and caulking sold separately)

$15.00$75.00

Description

Teardrop Trailer Aluminum Roof Trim Molding

This aluminum roof trim seals and secures the edges of the roof and side sheeting on a teardrop trailer.  Installing the trim only requires some screws and RV silicone sealant.  With a 1/4″ (6mm) overhang, it bends to fit most roof profiles of most teardrop trailers without crimping.  For added water protection, add the vinyl trim insert.

“When I made my first teardrop, I finished the roof edges with an aluminum trim molding.  My first teardrop was a fiberglass finish and the aluminum roof trim molding protected the edges from damage.  It works with metal, filon, or fiberglassed trailer finishes” – Mark

Additional information

Weight 15 lbs
Dimensions 92 × 3 × 3 in
Quantity

1 x 92" Section, 2 x 92" Sections, 3 x 92" Sections, 4 x 92" Sections, 5 x 92" Sections

Related Products